genproc: curve instancer from curves

Curve Instancer From Curves

Installation

To use this Node, you must enable wip.genproc.core in the Extension Manager.

Inputs

Name	Type	Description	Default
curvesBundle	bundle	Bundle containing curves data
terrainBundle	bundle	Bundle containing terrain data
samplingMode	int	0 = uniform, 1 = ramp	0
queryMode	int	0 = use horizontal plane, 1 = raycast to mesh, 2 = closest point on mesh	0
curveTopOffset	float	Offset of connection points to input curve(s)	0.0
curveBottomOffset	float	Offset of connection points to terrain / horizontal plane	0.0
minimumCurveLength	float	Curve instances will only be created if their length exceeds this value (after top and bottom offsets are applied)	0.0
curveUpAttrName	token	Name of attribute containing per-curve up vectors to be stored in output bundle	curveUp
rampSampleCount	int	Number of points to sample from curve ramp widget	50
rampSamplingPositions	float[]	Parametetric values from [0,1] at which sampling density can be specified	[]
rampSamplingValues	float[]	Sampling density on the curve. A value of 10 means that we should sample the curve with a step size of 1/10	[]
rampSamplingInterpolations	int[]	Interpolation method between keys. Linear is a creates a flat curve from point to point. Smooth creates an ease in or ease out curve from point to point.	[]
active	bool	Whether the node should run its compute	True
density	float	Constant number of samples to take along each segment of each curve	10.0

Outputs

Name	Type	Description	Default
reload	bool	Workaround option to force recomputation of output	False
rootedCurves	bundle	curves rooted in terrain